solaris 10 newfs error determining alternate superblock locations Rowe Virginia

General Business Operations Consulting Services, Marketing Consulting, Marketing Plan Development and Implementations, Telecommunications Consulting - Connectivity, Solutions, Brokerage, Cloud Services Consulting, Technology Planning, Expense Management

Address 227 Valleyview St, Haysi, VA 24256
Phone (866) 865-4109
Website Link

solaris 10 newfs error determining alternate superblock locations Rowe, Virginia

Thank you for your help Top Best Answer 0 Mark this reply as the best answer?(Choose carefully, this can't be changed) Yes | No Saving... ERROR: missing file arg (cm3) Cause An attempt was madd to run some sccs(1) operation that requires a filename, such as create, edit, delget, or prt. However, if this message occurs often, reconfigure the kernel to allow more open files. FSCK was running in YES mode.

Home | Invite Peers | More UNIX Groups Your account is ready. yes LOOK FOR ALTERNATE SUPERBLOCKS WITH NEWFS? The boot device is usually the machine's internal disk drive, target 3. Action Use the nslookup(1M) command to verify that the destination host exists in that or other domains, perhaps with a slightly different spelling.

If you didn't do anything to c0t0d0s0, then it should be intact. This happens either when trying to connect to an inactive service or when a service process is not present at the requested address. yes FOUND ALTERNATE SUPERBLOCK AT 32 USING NEWFS If filesystem was created with manually-specified geometry, using auto-discovered superblock may result in irrecoverable damage to filesystem and user data. USE GENERIC SUPERBLOCK FROM MKFS?

So this error indicates that the ToolTalk service is either not installed or is not installed correctly. Note that SPARC systems do not always support third party CDROM drives, and might generate a similar "unknown vendor" error message. Cross-device link Cause An attempt was made to make a hard link to a file on another device, such as on another filesystem. If you wish to run in that mode using the alternate superblock, run `fsck -y -o b=453920 /dev/rdsk/c1t2d0s0'.

Start a new thread here 3841902 Related Discussions How to growfs on "/" Root Filesystem Can I extend a file system, c1t1d0s0? yes FOUND ALTERNATE SUPERBLOCK 32 WITH MKFS USE ALTERNATE SUPERBLOCK? cd: Too many arguments Cause The C shell's cd(1) command takes only one argument. USE GENERIC SUPERBLOCK FROM MKFS?

I do it by using fsck -y -o -b=32 /dev/dsk/c1t1d0s2 . time/space optimization: Optimization can be set to allow for fastest performance or most efficient space useage. I have this error. Action Check the value of the $j macro in the /etc/mail/ file to ensure that this value is a fully-qualified domain name.

Cause A cpio(1) archive has either become corrupted or was written out with an incompatible version of cpio. VBS of a Solaris boot partition or Solaris boot manager program. When fsck gets into this state, it cannot repair a filesystem without losing one or more files, so it wants to defer this responsibility to you, the administrator. Action Temporarily start a Bourne shell with sh and run the command again.

Even when the shells claim that the file size is unlimited, in fact the system limit is FCHR_MAX (usually 1 gigabyte). taiwf View Public Profile View LQ Blog View Review Entries View HCL Entries Find More Posts by taiwf 09-28-2009, 06:05 PM #4 taiwf Member Registered: Jun 2005 Distribution: debian, Technical Notes The usual reason for this problem occurring is an automated script run from cron that clears out the /tmp directory every so often. Action Report this error to the system administrator for the host.

Don't have a SymAccount? c1t2d0 /[email protected],0/pci1000,[email protected]/[email protected],0 Specify disk (enter its number): ^D bash-3.00# df -h Filesystem size used avail capacity Mounted on /dev/dsk/c1t0d0s0 4.5G 4.0G 266M hw can i become a member of this site ? CANCEL FILESYSTEM CHECK?

Visit the following links: Site Howto | Site FAQ | Sitemap | Register Now If you have any problems with the registration process or your account login, please contact us. See Also For more information about the C shell, see csh(1). Note that /etc/init is a symbolic link to /sbin/init. Rutledge Information Systems Operations Manager 3500 Chad Drive Eugene, OR 97408 [email protected] Phone: 541-338-2532 Cell: 541-510-5177 Fax: 541-338-2844 Top Best Answer 0 Mark this reply as the best answer?(Choose carefully, this

Previous: Oracle Solaris ZFS File SystemNext: Where to Find File System Management Tasks © 2010, Oracle Corporation and/or its affiliates Documentation Home > System Administration Guide: Devices and File Systems > First make sure that you have a recent backup of the filesystem involved; if not, try to back up the filesystem now using ufsdump(1M). Action Verify that the ttsession command exists in /usr/openwin/bin or /usr/dt/bin. They hope these examples will help you to get a better understanding of the Linux system and that you feel encouraged to try out things on your own.

Action The user can delete files to bring disk usage under the limit, or the server administrator can use the edquota(1M) command to increase the user's disk limit. fsck: Can't stat /dev/dsk/variable Cause The fsck(1M) command cannot open the disk device, because the specified filesystem does not exist. Fact is (I hate to admit) I never established the second mirror. assertion failed: variable, file variable, line number Cause A condition in the program that was never expected to happen has happened.

Determine whether the bad superblock is in the root (/), /usr, or /var file system and select one of the following: If the bad superblock is in either the root (/), Otherwise it is fine to proceed with fsck. ** Phase 3 - Check Connectivity Cause The fsck(1M) command is checking a filesystem, and fsck is now verifying the integrity of directories. Dan Ryan replied Oct 27, 2010 Yes, I was definitely premature trying to boot from the mirror. Thus, if "fsck" is run on such a file system using an alternate super block reported by "newfs -Nv", fsck will complain about the super block.

To inform the system of a change to the target device number, reboot using the -r (reconfigure) option. The time now is 09:36 PM. - Contact Us - UNIX & Linux - unix commands, linux commands, linux server, linux ubuntu, shell script, linux distros. - Advertising - Top OK boot cdrom -sw Attempt to fsck(1M) boot disk. Then run the format(1M) command, select the disk involved, and print out the partition information. # format : N > partition > print Note whether the overlap occurs at the beginning

fsck processes objects as fragments, but in previous Solaris releases, only reported object information as blocks. If the timer is already set to a large number, look for hardware problems such as poor network cabling or connections. Host is down Cause A transport connection failed because the destination host was down. Past: PIMCO, Newport Beach, CA.

The newfs -N command can be invoked to nondestructively discover the superblock locations for the filesystem. You can always try 32 as an alternate block. Action Third-party CD drives generally have an 8192 block size, as opposed to the 512 block size on supported Sun drives. Email: [email protected]

Action All a user can do is restart the program and hope deadlock does not reoccur.